Chapter 7
Edging No. 4, Insertions and an Imitation Gymp

Fill the plain shuttle with Evan’s Boar’s-head No. 18, and the figured with No. 30. Tie these threads together, Pin No. 3.
1st Leaf, 1st Row. With the plain shuttle thread round the little finger (L, 1 D 10 times) tie to the 9th L (L, 1 R D tie to the next L 8 times), 1 R D attach to the foundation thread under the 1st L, 2 D (L, 2 D 4 times).
2nd Leaf, 1st Row. (L, 1 D 9 times) tie with the plain shuttle thread to the 5th L (counting from the point) of the last Leaf. Turn the work, 1 R D tie to the 9th L (L, 1 R D tie to the next L 8 times) 1 R D attach to the foundation thread under the 1st L; 2 D (L, 2 D 4 times). Repeat the 2nd Leaf till a sufficient length is worked.
2nd Row. Tie to the foundation thread of the 1st Leaf of the 1st Row, and tie the threads together. [With the plain shuttle thread round the little finger 9 D. Begin a figured shuttle oval, 5 R D join to the 2 centre Ls of the four Ls; 5 R D draw close. With the plain shuttle thread 9 D tie to the foundation thread of the 2nd Leaf under the 1st L, and repeat.]
3rd Row. Refil the shuttles and tie the threads together in the space under the last made oval; [2 D (L, 2 D 4 times) join to the space under the next oval. Repeat to the end of the work.]

Insertion No. 1
For the Strip.
Fill two plain shuttles and a figured one. With Ardern’s crochet cotton No. 12. Pin No. 1.
Tie these 3 threads together. With the thread of the 1st plain shuttle round the little finger, and always working with the figured shuttle. 2 D, L, 2 D turn these stitches under the thumb, with the thread of the 2nd plain shuttle round the little finger; 2 R D, L, 2 R D, repeat until you have twice the length you will require of insertion.
Refil a plain shuttle and the figured; tie the threads together. Pin No. 2.
Holding the right side of this strip upwards, tie to the 1st L: [with the plain shuttle thread round the little finger (L, 1 R D 9 times) turn the work. Begin a figured shuttle oval; (4 D join to the next L on the same side of the strip twice;) 3 D join to the next L; 2 D join to the next L; 3 D (join to the next L; 4 D twice) draw close. Tie to the foundation thread of this oval. Turn the work; with the plain shuttle thread on the little finger; (L, 1 R D 9 times) tie to the next L on the same side of the strip—repeat to the end of the strip.]
Work the same way on the opposite side, beginning by tying to the L above the centre of the last made oval.

Insertion No. 2
- Fill two plain shuttles, and one figured with Evan’s Boar’s-head No. 28. Pin No. 3.
- Work a similar strip to that in the 1st insertion.
- Refil one shuttle. Hold the strip on the right side.
- 1st Oval. Begin an oval; 1 D (L, 1 D 4 times) join to the 1st L of the strip; 1 D (L, 1 D 4 times) draw tight.
- 2nd Oval. Begin a second oval at a little distance; 1 R D (L, 1 R D 4 times) join to the last L on the same side of the strip, having turned it; 1 R D (L, 1 R D 4 times) draw tight.
- Repeat these two ovals, joining to the successive Ls on either side till all are joined.
An Imitation Gymp
——
Work the strip of the 1st insertion in Brook’s No. 8 crochet cotton. Pin No. 1. It may also be worked, in black, in coarse purse silk.




The
Reprinted from The Bath Tatting Book, by P.P. (1865). Free for personal use. Please share a link rather than copying this page.